(#0-977) SUPERB LOT OF THE EARLY SAVAGE LOADING TOOLS

These five tools are in the five calibers of the early Savage's: 25-35, 32-40, 38-55, 30-30 & Savage 303. They retain 98% blue, 98% case colors & 98% orig varnish. They are all quite possibly unused. The tools themselves are very scarce. This is the finest set I've ever encountered.

$ 2,750

(#0-978) SAVAGE LOADING TOOL

This set includes two chambers, .30-30 & .25-35. (The one marked .25-35 has been enlarged to accommodate a larger caliber). Nice cond retaining 30% blue & most of the case colors.

$ 325

(#0-979) MARLIN 1881 LOADING TOOL

Cal 38-55M. Plum brown patina, VG cond.

$ 275

(#0-980) MARLIN MODEL 1881 COMBO LOAD & MOLD TOOL

Cal 38-55. VG+, blue plum gray patina coloration; 7,XXX serial number

$ 300

(#0-981) MARLIN MOLD

Cal 32-165. VG, brown patina, nice wood, handles.

$ 75

(#0-982) IDEAL #6 LOADING TOOL & MOLD

Cal 32-40 M. 8 3/4", 80% aged blue color, sprue cutter hinge screw broken. Missing decapper pin.

$ 125

(#0-983) IDEAL #6 LOADING TOOL & MOLD

Cal 38-40. 8 3/4" long. Gray patina, missing decapper pin, lower handle cracked left side.

$ 100

(#0-984) IDEAL #1 LOADING TOOL & MOLD

Cal 38 S & W. Exc 95% nickel, complete.

$ 100

(#0-985) NO. 1 REGULAR IDEAL TOOL & MOLD SET

Caliber 32-20, in poor condition.

$ 20

(#0-986) IDEAL TOOL & MOLD SET

Cal 38-40. No. 6, exc, 90% nickel.

$ 100

(#0-987) #6 ADJUSTABLE IDEAL TOOL & MOLD SET

Marked ®Cal. 32 W SPL, 32 Marlin H.P., VG cond 70% nickel, missing adjustable chamber.

$ 90

(#0-988) IDEAL TOOL & MOLD SET

Cal 32-20. No. 1, VG, 15% nickel-balance smooth gray patina. Very unusual in that it is 8 1/4" long with recapper at the end! Missing decapper plug.

$ 65

(#0-989) IDEAL REGULAR #3 SPECIAL LOADING TOOL

Double adjustable Cal 44 S & W Spl., retains 80% dull re-blue. Missing decapper plug.

$ 95

(#0-990) IDEAL REG #3 SPECIAL LOADING TOOL

Single adjust, 30-40. 90% nickel, missing decapper plug.

$ 125

(#0-991) BOXED IDEAL REGULAR #3 SPECIAL LOADING TOOL

Cal 38 S & W Military. Exc+ cond retaining all orig nickel. This is a double adjustable example 7 1/2" long. The box has corner splits, only missing one end cap.

$ 150

(#0-992) IDEAL MOLD

Similar to above item except the mold itself will detach from the handles-interchange. This mold is marked ®457-125-121'. Very nice cond.

$ 50

(#0-993) IDEAL MOLD

Marked w/a large ®6' & the #'s ®321232 170', .32 Winch Special written on VG wood handles. Very nice. Appears to be a more recent type.

$ 50

(#0-994) IDEAL MOLD SET

Similar to above except is missing the half mold with cover and attachment screws. Marked ®311-466-47'. Very nice cond.?45-70GOV?303Brit?

$ 25

(#0-995) IDEAL REGULAR #3 SPECIAL LOADING TOOL

Double adjustable, Cal 32-40 M. VG+ cond, 60% orig nickel, missing decapper plug.

$ 115

(#0-996) IDEAL REGULAR #3 SPECIAL LOADING TOOL

Double adjustable Cal 25-20 R, VG, 50% nickel, missing decapper plug.

$ 95

(#0-997) IDEAL #6 ADJUSTABLE LOADING TOOL & MOLD

Cal 25-35. 70% nickel, missing decapper plug.

$ 100

(#0-998) IDEAL TOOL & MOLD SET

Cal 40-82 WCF. No. 6, about VG, light pitting, traces nickel, gray patina, missing decapper plug.

$ 80

(#0-999) IDEAL #6 LOADING TOOL & MOLD

Cal 44-40. 8 3/4" long, 15% nickel, balance brown.

$ 75

(#0-1000) IDEAL #1 LOADING TOOL & MOLD

Cal .41 C.D.A. Dark blue plum brown patina, missing decapper pin.

$ 125

(#0-1001) 8" NO. 4 IDEAL TOOL & MOLD SET

Cal 25-20 R. Very nice, retains 85% nickel.

$ 75

(#0-1002) REGULAR #1 IDEAL TOOL & MOLD SET

Cal. 32 S & W Long. In VG cond overall retaining 75% nickel finish, missing decapper plug.

$ 60

(#0-1003X) NO. 1 IDEAL TOOL & MOLD SET

Cal 32 S & W, overall good condition. (1 blue, 1 nickel).

$ 55. Ea

(#0-1004) IDEAL TOOL & MOLD SET

Cal 30 US. No. 3 Reg, exc+, 95% nickel, missing decapper pin.

$ 100

(#0-1005) IDEAL TOOL

Cal 45-70. Unknown model, appears that only function is as a capper, 7 1/4" overall, traces nickel. Experimental.

$ 150

(#0-1006) IDEAL TOOL & MOLD SET

Cal 32 W. Spl. & 32 MHP. No. 6, VG+, 80% nickel, missing decapper plug.

$ 95

(#0-1007) IDEAL TOOL & MOLD SET

Cal 32-40M. No. 6, exc+, 85% nickel.

$ 95

(#0-1008) IDEAL TOOL

Cal 25-20R. No. 3 Regular, exc+, 95% nickel.

$ 75

(#0-1009) IDEAL TOOL

Model 4, Cal 32-20. Small handles with bullet mold, flat nickel finish, VG cond.

$ 60

(#0-1010X) IDEAL MOLD

Approximately 41 Cal rounded nose, gray, some pitting, missing wood.

$ 30

(#0-1012) IDEAL MOLD

marked ®25720-86'. Nice.

$ 40

(#0-1015) IDEAL 4 BULLET MOLD

two sizes, marked ®358271 125 GR, 155 GR. 98%.

$ 50

(#0-1016) IDEAL MOLD

marked ®3118' on the brass portion. It has long handles, just over a foot long overall, nice cond.

$ 35

(#0-1017) UNMARKED LOADING TOOL

Possible C.D. Ladd tool (see Chamberlain's Tool Book, page 57). Caliber unknown, traces of gold paint inside the handle. 5 3/4" long, good condition.¯¯¯

$ 95

(#0-1018) UNMARKED CAPPING TOOL

Approximately 48 Cal. Fairly heavy tool. 5 3/4" long.

$ 75

(#0-1019) MANHATTAN FIREARMS 2 CAVITY MOLD

Ball and conical - .36 Caliber. 4 3/4" long, thinning blue plum patina coloration.

$ 150

(#0-1020) UNMARKED IRON MOLD

Closely resembles a Colt mold, only marking is a ®D' on one side. Double cavity ball & conical of approx .36 Cal, no grease groove. Exc cond, 70% thinning blue. 4 3/4" long.

$ 175

(#0-1021) UNMARKED BRASS MOLD

Approximately 52 Caliber conical mold with 2 grease grooves, missing a piece of brass. 5" long.

$ 30

(#0-1022) UNMARKED BRASS MOLD

Approximately 46 Cal conical mold. 4 3/4".

$ 30

(#0-1025) MARLIN MODEL 1881 COMBO LOAD & MOLD TOOL

Cal 32-40. Near exc, 30% bright blue-balance flaked; 6,XXX serial number range. Very rare.

$ 375

(#0-1026) COLTS PATENT' BRASS 1849 POCKET MODEL MOLD

(English version) .31 Cal. VG+ overall. (See M15 in Rapley's Accoutrements Book).

$ 175

(#0-1027) UNMARKED BRASS MOLD

Approximately 36 Cal ball mold. 3 3/4".

$ 30

(#0-1029) DOUBLE PILLAR RECAPPER MACHINE

Marked ®U.H. Co., 12, C, No. 5'. Retains much of the orig green paint on its base. The brass parts have turned a dark patina coloration. Interesting & very rare-this is the only one I have encountered.

$ 175

(#0-1030) BGI CO. MARKED 10 GAUGE RELOADING TOOL

VG+ cond, retains 80%+ of its orig maroon paint.

$ 65

(#0-1031) CAPPING TOOL

MARKED ®CURRIER KOETH MFG. CO., ...RSPORT, PA, .....K TOOL; pat July 2, 1900, 50 Cal?, gray patina. Very rare.

$ 100

(#0-1032) UNMARKED BALL MOLD

Approximately 38 cal., 4 1/2 " long, good cond.

$ 15

(#0-1033) UNMARKED BRASS BULLET MOLD FOR BALL & CONICAL BULLET

of approx. .41 cal. 5-1/2" long. VG cond.

$ 20

(#0-1034) UNMARKED BALL MOLD

Approximately .36 cal., 7" long, good cond.

$ 15

(#0-1035) MAYNARD MOLD

38 Cal?. VG+, blue plum brown patina. Rare.

$ 125

(#0-1036) REMINGTON CAPPER

W/Berden decapping chisel, retains most the gold paint on tool. Rare.

$ 175

(#0-1038) COLTS PATENT' BRASS BABY DRAGOON MOLD

31 Cal. VG Cond. See M12 in Rapley's Accoutrements Book.

$ 250

(#0-1039) COLTS PATENT' BRASS 1849 POCKET MOLD

31 Cal. VG cond. See M13 in Rapley's Accoutrements Book.

$ 125

(#0-1040) COLTS PATENT' IRON 1849 POCKET MOLD

.31 Cal. Generally VG cond with some pitting, blue gray patina coloration. (See M16 in Rapley's Accoutrements Book). The screw head has broken off.

$ 125

(#0-1041) COLTS PATENT' BRASS SECOND MODEL DRAGOON MOLD

This is probably a civilian mold as it lacks the –WAT' mark. VG brass, the sprue cutter is an unmarked replacement. Hard to find mold. (See M8 in Rapley's Accoutrements Book).

$ 250

(#0-1042) UNMARKED 2-CAVITY MOLD, BALL & CONICAL

w/grease groove, 38 Cal. Missing sprue cutter, VG. 4 3/4".

$ 55

(#0-1043) UNMARKED 2-CAVITY MOLD, BALL & CONICAL

without grease groove, approximately .36 Cal. some light pitting. 5" long.

$ 45

(#0-1044) UNMARKED SINGLE CAVITY BALL MOLD

Approximately .40 Cal. VG.

$ 35

(#0-1045) UNMARKED 2-CAVITY MOLD, BALL & CONICAL

approx .31 Cal. W/O grease groove. Light pitting, handle ends carry screw driver & nipple wrench.

$ 75

(#0-1046) UNMARKED DOUBLE CAVITY MOLD, BALL & CONICAL

With grease groove, approximately .36 Cal. Handles modified to accommodate wood grips.

$ 45

(#0-1047) LARGE UNMARKED SGL CAVITY MOLD

approx 40 Cal conical, 5 grease grooves, 8 1/2", wood handles.

$ 35

(#0-1048) SINGLE CAVITY CONICAL MOLD

1 grease groove, .32 Cal., missing sprue cutter.

$ 50

(#0-1050) SGL CAVITY BALL MOLD

Approx 32 Cal. Rather delicate, primitive, heavy pitting, 6" long.

$ 25

(#0-1051) SGL CAVITY BALL MOLD

Approx 40 Cal. Delicate primitive tool, heavy pitting. 4 3/4" long.

$ 25

(#0-1052) APPROXIMATELY .62 CAL SINGLE CAVITY MOLD

Makes a rather short, squatty, hollow based bullet. Nice condition, 8 1/4" long.

$ 65

(#0-1053) 38-55 MARKED MOLD

Resembles Win 5th Mod-has broken handles, rusted shut, missing sprue cutter.

$ 20

(#0-1055X).

APPROX .41 CAL, NO. 56; 4 3/4".

$ 35

(#0-1056).

APPROX .73 CAL, NO. 12; 6 1/2".

$ 55

(#0-1057).

APPROX .46 CAL, NO. 48; 5 1/4"

$ 35

(#0-1058).

APPROX .32 CAL, NO. 105; 4 1/2.

$ 35

(#0-1059).

APPROX .48 CAL, NO. 50; Wood handles. 7".

$ 40

(#0-1060).

APPROX .42 CAL, NO. 48; 4 1/2".

$ 40

(#0-1061).

APPROX .45 CAL, NO. 38; 5 1/2".

$ 35

(#0-1062).

APPROX .54 CAL, NO. 30; 5 1/4".

$ 35

(#0-1063).

APPROX .66 CAL, NO. 16; 6".

$ 30

(#0-1064).

APPROX .38 CAL, NO. 80; 4 1/2".

$ 35

(#0-1065) KRAEUTER USA' MARKED WAD-CUTTER

Also marked ® 3/4'. Good+ cond, some pitting.

$ 20

(#0-1066) 8 GAUGE WAD-CUTTER

Shows use w/the top mushroomed somewhat. Cutter end looks useable.

$ 20

(#0-1067) 8 GA WAD-CUTTER

VG+, used very little.

$ 25

(#0-1068) 8 GAUGE WAD-CUTTER

Shows use with mushroomed top, cutter shows some irregularities & breakage.

$ 15

(#0-1069) 6 GAUGE WAD-CUTTER

also has a ®B' in a diamond mark, about VG cond.

$ 30

(#0-1070) PROBABLY A 6 GAUGE WAD-CUTTER

VG cond.

$ 30

(#0-1071) 12 GAUGE WAD-CUTTER

well used cond, some mushrooming on end, irregular cutter.

$ 15

(#0-1072X) 20 GAUGE CAPPING TOOL

smooth spoon handles, exc cond, most orig black paint.

$ 25

(#0-1073X) 16 GAUGE CAPPING TOOL

smooth spoon handles, VG cond, 75% orig black paint.

$ 25

(#0-1074X) 10 GAUGE CAPPING TOOL

smooth spoon handles, exc cond, most orig black paint.

$ 25

(#0-1075XX) 10 GAUGE CAPPING TOOL

smooth spoon handles, VG cond, 50-60% orig black paint.

$ 20

(#0-1076X) 10 GAUGE CAPPING TOOL

Acorn style serrated spoon grips, exc+, most orig black paint.

$ 25

(#0-1077) UNMARKED CAPPING TOOL WITH BERDEN DECAPPING CHISEL

probably made by Remington, 12 gauge, (see Chamberlain Tool pamphlet-page 20). Exc cond, retains most orig nickel.

$ 65

  BACK  < <  WINCHESTER LOADING TOOLS  

  NEXT PAGE  > >  BARRELS AND SIGHTS